How To Perform Raid Data Recovery At Home?

      Comments Off on How To Perform Raid Data Recovery At Home?

A RAID Recovery is a process of retrieving data that has been accidentally erased from a hard drive. In most cases, the data on your drive gets erased due to bugs, system updates, viruses, or other incidents. It is extremely important to have your raid data recovery services if you have accidentally erased some data from your hard drive.

RAIDs are designed to provide fault tolerance for data stored on a hard drive. If you are using a RAID setup, your data is divided into small blocks and spread across multiple hard drives. This provides redundancy for the data should one hard drive fail. However, if you accidentally erase some of your data from a RAID, you’ll need to recover it. So how do you manage to recover data from a RAID? Read on to know more about RAID recovery and how to do it at home.

How does RAID work?

RAID stands for Redundant Array of Inexpensive Drives. RAID is a method for storing data in a way that is protected from any single point of failure. When you have a RAID, the data on your hard drive is divided into small blocks and stored across multiple drives. This provides redundancy for your data should one hard drive fail. So, if you are using a RAID setup, what happens if an individual hard drive fails?

RAID Recovery Process

When your RAID is in a degraded state, you need to perform a RAID recovery. Before you can do this, it is important to understand what the process entails. The first step of the process is to verify that your RAID controller is able to detect problems with the RAID array itself.

If there are no problems with the controller, you will need to isolate the failed drive from the others in your RAID and then replace it. Once that process is complete, you will start rebuilding the data on your new drive through an application that was developed specifically for this purpose. To learn more about how to recover data from a RAID, visit these sites:

RAID Data Recovery Equipment

There are a few types of RAID Recovery Equipment available. These include:

  1. Hardware RAID Recovery Tool
  2. Operating System Recovery
  3. Software RAID Recovery Tool

Hardware RAID Recovery Tools are devices that connect to your computer’s hard drive and allow you to recover data from the server.

This includes data recovery programs, like EaseUS Data Recovery Wizard. Operating System Recovery is done by booting into an operating system that was not originally installed on your computer. Software RAID Recovery Tools are applications that run from within the operating system that you were booted into after your accidental deletion.

RAID Recovery Steps

If your data on a RAID gets accidentally erased, there are a few things you need to do before you can recover it. First, you need to identify the type of RAID setup that you have. This will help you know what kind of recovery software is necessary to recover the data. Next, download and run the appropriate data recovery software on your computer.

There are many different types of recovery software that can be used with a RAID. However, most RAIDs will use one of two types: sector-by-sector or block-by-block recovery software. After running the correct type of recovery software on your computer, plug all of the hard drives in your RAID setup into your computer’s USB ports.

The hard drives can be connected either directly or via an external drive enclosure if possible. If all of the hard drives are connected via an external enclosure and there is no power cable available for any of them, then connect each hard drive individually to a USB port on your computer’s motherboard with a short cable and then connect them all together to one USB port after that. Next, select which partitions need to be recovered from the RAID and click “Scan Partitions” from within the main window.

This will start scanning through all of the partitions for files that have been deleted from them recently (usually over 1 day). If none of these steps helped recover any deleted files from your RAID partitions, then try selecting only the partition that has.


RAID is a type of data storage that allows multiple hard disks to act as if they are a single large disk. It is often used in server environments that need to store large amounts of data, with the goal of improving performance and reliability. RAID data recovery is the process of recovering data from a device or system that experiences a failure. The RAID recovery process is typically performed using the same hardware that failed, which can be done at home using a RAID recovery toolbox.